Attention for using a laser marking machine

Attention for using a laser marking machine

● Do not look at or touch the beam (with or without protective glasses). Eyes and other parts of the body should not touch the laser output by the device or diffuse laser, otherwise it will cause blindness or burns. 
● Non-professional personnel are prohibited to disassemble, repair and transform equipment. 
● People using cardiac pacemakers should not get close to the equipment. Magnetic field will be generated during the operation of the coding machine, which will affect the normal operation of the pacemaker. 
● Non-operating personnel shall not enter the coding work area. 
● During the normal operation of the laser, the code machine shall not add any parts and articles. Do not use the coding system with the seal cover open. 
● It is forbidden to stack inflammable and explosive materials and debris around the machine. Flammable and explosive materials shall not be set on the light path or the place where the laser beam may shine. 
● In case of fire or explosion of the machine, be sure to cut off all power supply and use carbon dioxide or dry powder extinguisher to extinguish the fire. 
● Do not damage the power cord and cable, smell odor immediately shut down the power to stop running. 
● Keep the environment around the equipment dry. When the equipment is not working, turn off the power and operate the equipment with one hand as far as possible. 
● Do not place liquid containers on the chassis. Do not allow any water source to approach the device.